Stiga SWR 2604 User Manual

EN - 11
8. STORAGE
When you intend to put your machine
away for more than 30 days:
1. Change the engine oil if this operation has
not been done in the last three months.
2. Accurately clean the machine.
3. Check for any damage. If necessary,
see to the necessary repairs.
4. If the paintwork is damaged,
touch it up to prevent rust.
5. Protect any exposed metal surfaces from rust.
6. Store the machine indoors if possible.
7. Avoid placing heavy loads on the brush and
brush protection guard. The weight could
deform the brush and make it unusable.
9. ASSISTANCE AND REPAIRS
This manual provides all the necessary
information to run the machine and for correct
basic maintenance operations which can
be performed by the user. Any regulations
and maintenance operations not described
herein must be carried out by your Dealer
or Authorized Service Centre, which have
the necessary knowledge and equipment to
ensure that the work is carried out correctly,
maintaining the correct degree of safety and the
original operating conditions of the machine.
Any operations performed in unauthorized
centres or by unqualied persons will totally
invalidate the Warranty and all obligations
and responsibilities of the Manufacturer.
• Only authorized service workshops can carry
out guaranteed repairs and maintenance.
• The authorized service workshops
only use genuine spare parts. Genuine
spare parts and accessories have been
designed specically for machines.
• Non-genuine spare parts and accessories are
not approved. Use of non-genuine spare parts
and accessories cause the warranty to expire.
• It is advisable to send your machine
once a year to an authorized service
workshop for servicing, assistance
and safety device inspection.
10. WARRANTY COVERAGE
The warranty covers all material and
manufacturing defects. The user must
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover
damages caused by:
• Failure to become familiar with the
documentation accompanying the machine.
• Carelessness.
• Incorrect or prohibited use or assembly.
• Use of non-genuine spare parts.
• Use of accessories not supplied or
approved by the manufacturer.
The warranty does not cover:
• Normal wear and tear of consumables,
such as drive belts, drills, headlights,
wheels, bolts and wires.
• Normal wear and tear.
• Engines. Engines are covered by
the warranty provided by the relative
manufacturer in compliance with the
specied terms and conditions.
The purchaser is protected by his own national
legislation. The purchaser’s rights envisaged
by the national laws in his own country are
not in any way restricted by this warranty.
11. MAINTENANCE TABLE
  Paragraph
First time 
MACHINE
Check all fasteners
- Before each use 7.7
Safety checks/check controls
- Before each use 6.2
General cleaning and inspection
- Cleaning the exhaust area 7.4
ENGINE
*** Interventions which must be carried out by your dealer or an authorised assistance centre

Stiga SWR 2604 Specifications

General

Brand	Stiga
Model	SWR 2604
Category	Blower
Language	English