34
2.3 Important: If starting in "Cold Start" position,
move
Master Control lever (1) to
"Warm Start"
)\(
as soon as
engine begins
to fire and then continue cranking until
engine runs.
Engine
running
3.1 Immediately blip the throttle trigger (8)
so
that Master
Control lever
moves
to "Run"
I
position and engine
settles down to idle speed.
Warning!
The
clutch
can be damaged
if the
engine is
not immediately returned to idle speed.
3.2 Disengage
the chain brake before starting work, i.e.
pull the hand guard (1) back towards the front
handle.
Stopping
engine
The engine is stopped by moving the Master Control
lever (3) to
)\(
oc
co)
4..>
EEC
EEC
EEC
CE
CC
of
EEC
CCC
EEC
CC
C
et
CCC
EEC
:CC
'Si
H
To Next Page
Loading...
