BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
English
15
Change the fuel pick up body every
year
Before storing your machine for a long
period, drain and clean the fuel tank and
run engine until carburetor is dry.
Starting the engine
N Observe safety precautions.
N Press the fuel pump bulb (1) at least
five times – even if the bulb is filled
with fuel.
Adjusting the setting lever
Only on BG 66 C, BG 86, SH 86
N To start, move the setting lever to
the run position F
The setting lever selects and holds any
throttle position between idle and full
throttle.
Adjusting the choke knob
If the engine is cold
N Set the choke knob to g
If the engine is warm
N Set the choke knob to <
Also use this setting if the engine has
been running but is still cold.
Warning!
After fueling, tighten fuel cap as
securely as possible by hand.
295BA065 KN
Starting / Stopping the
Engine
1
295BA066 KN
295BA069 KN
295BA067 KN295BA068 KN
To Next Page
Loading...
