ADG 2
English
11
– Country-specific safety precautions
and the safety instructions in the
user manuals must be observed
when the analyzer is operated.
– To reduce the risk of personal injury,
do not operate the analyzer if it is
damaged or not properly
assembled.
– Use the analyzer only for testing
STIHL cordless power tools.
– Visual inspection – check cordless
power tool for signs of damage.
– Before starting the test, always take
precautions to reduce the risk of
accidents and injury from contact
with the power tool's attachment.
Position cordless power tool
accordingly and mount safety
devices or accessories (e.g.
cutterless chain) if necessary.
– Wear personal protective
equipment.
– No user entries can be made on the
computer while the test is running.
N Take the analyzer's adapter out of
the cordless power tool.
N Remove the battery from the
analyzer.
N Disconnect the plug from the wall
outlet.
N Disconnect USB cable from
analyzer.
N Store analyzer and USB cable in a
dry, locked location. Keep out of the
reach of children and other
unauthorized persons and
protected from contamination.
1 Analyzer
2 Battery
3 Adapter
4 Connecting cord to cordless power
tool
5 Power cord
6 Display
7 Light emitting diode (LED)
8 Lower pushbutton
Using the Unit Storing the Analyzer Main Parts
To Next Page
Loading...
Need help?
General