BF-KM
English
14
For periods of 3 months or longer
N Remove, clean and inspect the rotor
blades.
N If the KombiTool is removed from
the KombiEngine and stored
separately: Fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
N Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
The following intervals apply to normal
operating conditions only. If your daily
working time is longer or operating
conditions are difficult (very dusty work
area, etc.), shorten the specified
intervals accordingly.
All accessible screws and nuts
N Retighten if necessary
Sweeping attachments and deflectors
N Visual inspection, check tightness
before starting work and after every
refueling stop
N Replace if damaged
Safety labels
N Replace illegible safety labels
Storing the Machine Maintenance and Care
To Next Page
Loading...
