7BG 55, BG 65, BG 85, SH 55, SH 85
English
Vibrations
Prolonged use of the unit may result in 
vibration-induced circulation problems in 
the hands (whitefinger disease).
No general recommendation can be 
given for the length of usage because it 
depends on several factors.
The period of usage is prolonged by:
– Hand protection (wearing warm 
gloves)
– breaks
The period of usage is shortened by:
– Any personal tendency to suffer 
from poor circulation (symptoms: 
frequently cold fingers, itching).
– Low outside temperatures.
– Gripping force (a tight grip hinders 
circulation).
Continual and regular users should 
monitor closely the condition of their 
hands and fingers. If any of the above 
symptoms appear, seek medical advice.
Maintenance and repairs
The machine must be serviced regularly. 
Do not attempt any maintenance or 
repair work not described in your 
Owner’s Manual. All other work should 
be carried out by a servicing dealer. 
STIHL recommends that maintenance 
and repair work be carried out only by 
authorized STIHL dealers. STIHL 
dealers receive regular training and are 
supplied with technical information.
Use only high-quality replacement parts, 
in order to avoid the risk of accidents or 
damage to the machine. Contact a 
dealer if in doubt.
STIHL recommends the use of genuine 
STIHL spare parts. Such parts have 
been optimized for the machine and the 
user's requirements.
Before starting any maintenance or 
repair work and before cleaning the 
machine, always  stop the engine and 
disconnect the spark plug boot  to 
avoid all  risk of injury  if the engine 
starts up inadvertently.  – Exception: 
adjustment of carburetor and idle speed.
Do not service or store the machine near 
a naked light – risk of fire due to the 
fuel.
Check fuel cap regularly for tightness.
Use only the spark plugs approved by 
STIHL – see Specifications.
Inspect ignition lead (insulation in good 
condition, secure connection).
To reduce the risk of fire due to ignition 
outside the cylinder, move the slide 
control / stop switch to STOP or 0 before 
turning the engine over on the starter 
with the spark plug boot removed or the 
spark plug unscrewed.
Check that the muffler is in perfect 
working condition.
Do not use the machine if the muffler is 
damaged or missing – risk of fire! – 
Hearing damage!
Do not touch the hot muffler – risk of 
burns!
The condition of the anti-vibration 
buffers influences the machine's 
vibrations – they must be examined 
regularly.