0458-724-8601-A
23
English
18 After Finishing Work
To activate the boost function:
► Override the trigger switch's (1) end position and hold it
there.
The LEDs flash in sequence, indicating that the boost
function is activated.
De-activate the boost function by releasing the trigger
switch (1). The previous power level will be restored.
Generally, battery life will be shorter when operating
continuously in the boost level.
17.4 Using the Blower
WARNING
Always wear proper clothing and protective apparel,
including proper eye protection, @ 5.4. Never direct the air
flow toward bystanders. Keep bystanders at least 17 ft.
(5 m) away from the work area, @ 5.6.4. Work carefully and
maintain proper control of the blower.
The blower is designed for single-handed operation with the
right hand.
► Hold the unit firmly with your hand, keeping the handle
cradled between your thumb and fingers.
► Direct the air flow at the edges of the pile of material to be
blown.
NOTICE
Never direct the air flow toward objects such as vehicles or
windows.
Observe all applicable laws, regulations, standards and
ordinances.
18.1 Preparing for Transportation or Storage
WARNING
To reduce the risk of personal injury from unintended
activation or unauthorized use, switch off the motor and
remove the battery before transporting the blower.
To prepare the blower for transportation or storage:
► Switch off the blower, @ 15.2.
► Remove the battery, @ 14.2.
► If the blower became wet during operation, allow it to dry
separately and completely before charging or storing.
18 After Finishing Work
To Next Page
Loading...
