Stihl FS 310 - User Manual

{
STIHL FS 310
WARNING
Read and follow all safety
precautions in Instruction Manual –
improper use can cause serious or
fatal injury.
ADVERTENCIA
Lea y siga todas las precauciones
de seguridad dadas en el manual
de instrucciones – el uso incorrecto
puede causar lesiones graves o
mortales.
Instruction Manual
Manual de instrucciones

Stihl FS 310 Specifications

General

Power Output	1.4 kW
Engine Type	2-stroke
Shaft Type	Straight
Sound Power Level	112 dB(A)
Engine Displacement	36.3 cc
Fuel Capacity	0.95 liters
Cutting Diameter	23-25 cm
Cutting Width	23-25 cm
Starter	Recoil

Summary

Safety Precautions and Working Techniques

Safety Precautions and Working Techniques

General safety advice for operating the tool.

THE OPERATOR

Working Conditions

Operating Instructions

Using the Mowing Heads

Using the Grass Cutting Blade

Using the Brush Knife

Using the Circular Saw Blade

Approved Combinations and Mounting

Approved Combinations of Cutting Attachment, Deflector, Limit Stop and Harness

Mounting the Bike Handle

Step-by-step instructions for attaching the bike handle.

Adjusting the Throttle Cable

How to adjust the throttle cable for proper operation.

Mounting the Deflector

Instructions for selecting and fitting the correct deflector.

Mounting the Cutting Attachment

Engine and Fuel

4-MIX Engine

Fuel

Fueling

Operation

Fitting the Full Harness

Balancing the Trimmer;Brushcutter

Starting; Stopping the Engine

Starting

Maintenance and Troubleshooting

Replacing the Air Filter

How to clean or replace the air filter for optimal performance.

Adjusting the Carburetor

How to adjust the carburetor for different conditions.

Adjusting Idle Speed

Steps to set the correct idle speed for the engine.

Spark Arresting Screen in Muffler

How to check and clean the spark arresting screen.

Spark Plug

Checking and maintaining the spark plug.

Lubricating the Gearbox

Procedure for lubricating the gearbox.

Replacing the Starter Rope and Rewind Spring

Steps for replacing the starter rope and rewind spring.

Storing the Machine

Sharpening Metal Cutting Blades

Maintaining the Mowing Head

Procedures for maintaining the mowing head and adjusting line.

Maintenance and Care

A detailed schedule for machine maintenance tasks.