FS 38
English
30
N Thread the ends of the lines (6)
through the sleeves (7) and push
the spool (2) into the head so that it
snaps into position.
The nylon lines must disengage from the
notches (5) as the spool is pushed into
position.
N Pull out the ends of the lines as far
as stop.
N Mount the mowing head on the
machine.
Maintenance Work
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
Fuel Pickup Body in Tank
N Have the pickup body in the fuel
tank replaced every year.
Spark Arrestor in Muffler and Spacer
See "Main Parts" for positions of spark
arrestor and spacer.
N If the engine is down on power,
have the spark arrestor in the
muffler checked.
N Check spacer for damage.
N Have damaged spacer replaced
immediately.
Inspections and Maintenance
by Dealer
To Next Page
Loading...
