Need help?Do you have a question about the Stihl FS 36 and is the answer not in the manual?
General| Engine Power | 0.8 kW |
|---|---|
| Engine Type | 2-stroke |
| Fuel Tank Capacity | 0.33 L |
| Shaft Type | Straight |
| Displacement | 27.2 cc |
| Starter System | Recoil |
Covers general trimmer hazards, operator fitness, and prohibition of minors/bystanders.
Mandates proper clothing, eye, hearing protection, and footwear for safe operation.
Details safe fuel handling, leak checks, and securing the fuel cap to prevent fire and spills.
Outlines safe starting procedures, bystander distance, and proper footing.
Specifies outdoor operation and warns about toxic exhaust fumes, advising against indoor use.
Focuses on safe cutting tool operation, including clearance, starter rope, grip, deflector, and regular checks.
Stresses stopping the engine before any maintenance and avoiding work not described in the manual.
Warns against welding or straightening damaged cutting attachments due to risk of disintegration.
Advises frequent checks for cutting tool cracks, dullness, and tightness, with immediate replacement if needed.
Presents a chart detailing maintenance tasks and their recommended intervals for various components.
Details the STIHL Polycut mowing heads, their blade types, and important wear limit indicators for safety.
Details the required fuel type, oil classification, and the correct 50:1 mixing ratio for the trimmer.
Outlines safe fueling procedures, including cleaning the cap, shaking the mixture, and releasing pressure.
Explains the function of controls like the stop switch, throttle interlock, and throttle trigger for starting.
Explains the use of the choke (filter cover) and fuel pump bulb for starting cold and warm engines.
Details the step-by-step procedure for starting both cold and warm engines.
Details the safe way to position the unit, ensure firm footing, and pull the starter grip correctly.
Provides detailed troubleshooting steps for engine start failures, including flooded engines and spark plug issues.
Provides troubleshooting steps for when the engine fails to start, including checks for flooding or spark plug issues.
Explains how to adjust the idle speed correctly so the cutting tool remains stationary.
To Next Page
