Stihl GS 461 - Clutch

GS 461
English
15
Preparing the machine
N Before fueling, clean the filler cap
and the area around it so that dirt
cannot fall into the tank
N Always position the machine so that
the filler cap is facing upwards
WARNING
Never use a tool to open the bayonet
filler cap. This could damage the cap
and cause fuel to leak out.
Opening the twist lock
N Press the filler cap down as far as
possible by hand, then turn it
counterclockwise (approx. 1/8 turn)
and remove
Refuel
Take care not to spill fuel while fueling
and do not overfill the tank. STIHL
recommends use of the STIHL filling
system for fuel (special accessory).
Closing the filler cap
N Fit the cap and turn it until it
engages in the bayonet catch
N Press the cap down as far as
possible with your hand and turn it
clockwise (approx. 1/8 of a turn)
until it engages properly
Changing the fuel pickup body every
year
N Drain the fuel tank
N Pull the fuel pickup body out of the
tank with a hook and disconnect it
from the hose
N Connect a new fuel pickup body to
the hose
N Return the fuel pickup body to the
tank
Fueling
2411BA017 KN
2.
1.
2411BA018 KN
2.
1.
2411BA019 KN