Hedge Trimmer Safety Manual
English
10
Keep the cutting tool sharp. Tighten all
nuts, bolts and screws, except the
carburetor adjustment screws, after
each use.
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
Store the power tool in a dry and high or
locked location out of reach of children.
Before storing for longer than a few
days, always empty the fuel tank. See
chapter "Storing the machine" in this
manual.
HS 81 R
The HS 81 R is designed for cutting
hedges and shrubs with thicker stems
and branches.
HS 81 T
The HS 81 T is designed for shaping
and trimming hedges and shrubs with
thinner branches.
Use the HS 81 R hedge trimmer for
cutting hedges with thicker branches.
Cutting Season
Observe country-specific or municipal
rules and regulations for cutting hedges.
Do not use your power tool during other
people's rest periods.
Cutting Sequence
Use lopping shears or a chain saw to cut
out thick branches first.
Cut both sides of the hedge first, then
the top.
Disposal
Do not throw cuttings in the garbage can
– they can be composted!
Using the Unit
To Next Page
Loading...
