Hedge Trimmer Safety Manual
English
3
exposure to vibration are mentioned as 
factors in the development of whitefinger 
disease. In order to reduce the risk of 
whitefinger disease and carpal tunnel 
syndrome, please note the following:
– Most STIHL power tools are 
available with an anti-vibration 
("AV") system designed to reduce 
the transmission of vibrations 
created by the machine to the 
operator's hands. An AV system is 
recommended for those persons 
using power tools on a regular or 
sustained basis.
– Wear gloves and keep your hands 
warm.
– Keep the AV system well 
maintained. A power tool with loose 
components or with damaged or 
worn AV elements will tend to have 
higher vibration levels.
– Maintain a firm grip at all times, but 
do not squeeze the handles with 
constant, excessive pressure. Take 
frequent breaks.
All the above-mentioned precautions do 
not guarantee that you will not sustain 
whitefinger disease or carpal tunnel 
syndrome. Therefore, continual and 
regular users should closely monitor the 
condition of their hands and fingers. If 
any of the above symptoms appear, 
seek medical advice immediately.
Proper Clothing
Be particularly alert and cautious when 
wearing hearing protection because 
your ability to hear warnings (shouts, 
alarms, etc.) is restricted.
Avoid loose-fitting jackets, scarfs, 
neckties, jewelry, flared or cuffed pants, 
unconfined long hair or anything that 
could become caught on branches, 
brush or the moving parts of the unit. 
Secure hair so it is above shoulder level.
THE POWER TOOL
For illustrations and definitions of the 
power tool parts see the chapter on 
"Main Parts".
Warning!
The ignition system of the STIHL unit 
produces an electromagnetic field of a 
very low intensity. This field may inter
-
fere with some pacemakers. To reduce 
the risk of serious or fatal injury, persons 
with a pacemaker should consult their 
physician and the pacemaker manufac
-
turer before operating this tool.
Warning!
To reduce the risk of injury, the operator 
should wear proper protective apparel.
Warning!
To reduce the risk of 
injury to your eyes never 
operate your power tool 
unless wearing goggles 
or properly fitted protec
-
tive glasses with 
adequate top and side protection com
-
plying with ANSI Z 87.1 (or your 
applicable national standard.) To 
reduce the risk of injury to your face 
STIHL recommends that you also wear 
a face shield or face screen over your 
goggles or protective glasses.
Power tool noise may damage your 
hearing. Wear sound barriers (ear plugs 
or ear mufflers) to protect your hearing. 
Continual and regular users should 
have their hearing checked regularly.
Always wear gloves 
when handling the 
machine and the cutting 
tool. Heavy-duty, nonslip 
gloves improve your grip 
and help to protect your 
hands.
Clothing must be sturdy 
and snug-fitting, but allow 
complete freedom of 
movement. Wear long 
pants made of heavy 
material to help protect 
your legs. Do not wear 
shorts, sandals or go 
barefoot.
Good footing is very 
important. Wear sturdy 
boots with nonslip soles. 
Steel-toed safety boots 
are recommended.