Stihl HL 100 - Starting; Stopping the Engine; Fitting the Harness

HL 100, HL 100 K
English
21
Some versions of the machine can be
carried on a harness.
The type and style of the harness
depend on the market.
Shoulder strap
N Put on the shoulder strap (1).
N Adjust the length of the strap.
N With the power tool attached, the
carabiner (3) must be at about the
same height as your right hip.
Full harness
N Put on the full harness (2).
N Adjust the length of the strap.
N With the power tool attached, the
carabiner (3) must be at about the
same height as your right hip.
Controls
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
Positions of slide control
4STOP
-
0 – engine off – the ignition is
switched off
5 F – normal run position – the engine
is running or can start
6START – ignition is switched on –
the engine can start
Fitting the Harness
1
388BA037 KN
3
2
388BA038 KN
3
Starting / Stopping the
Engine
3
STOP
2
5
6
4
7
002BA181 KN
START
STOP-
1