HL 95, HL 95 K, HL 100, HL 100 K
English
24
Cutting blades
Visual inspection XX
Clean
2)
X
Sharpen
2)
XX
Gearbox lubrication
Check X
Replenish X
Safety labels Replace X
1)
STIHL recommends an authorized STIHL servicing dealer.
2)
Spray with STIHL resin solvent after cleaning
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required
To Next Page
Loading...
