HS 46, HS 46 C, HS 56 C
English
10
Tank cap without symbols
Opening
N Swing the grip to the upright
position.
N Rotate the tank cap about a quarter
turn counterclockwise.
N Remove the cap.
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for fuel (special accessory).
N Fill up with fuel.
Closing
Grip must be vertical:
N Fit the cap – positioning marks on
tank cap and filler neck must be in
alignment.
N Press the cap down as far as stop.
N While holding the cap depressed,
turn it clockwise until it engages in
position.
N Fold the grip flush with the top of the
cap.
Checking security of cap
– The lug on the grip must fully
engage the recess (arrow).
Left: Tank cap without symbols
Right: Tank cap with markings and
symbols on cap and tank
To Next Page
Loading...
