HSA 65
English
11
If the red light emitting diodes light
up / flash continuously
The light emitting diode lights up green
or flashes red.
Green continuous light ...
... means the following:
The battery
– is being charged
– is too hot and must cool down
before it is charged
See also "Light Emitting Diodes (LED)
on Battery".
The green light emitting diode on the
charger goes off as soon as the battery
is fully charged.
Red flasing light ...
... means the following:
1 light emitting diode
lights up red:
Battery is too
hot
1) 2)
/cold
1)
1)
During charging process: Charging
process starts automatically after
the battery has cooled down /
warmed up.
4 light emitting diodes
flash red:
Battery faulty
3)
3 light emitting diodes
light up red:
Power tool is too
hot – allow it to
cool down.
3 light emitting diodes
flash red:
Power tool
faulty – have
checked by
servicing
dealer
4)
3901BA017 KN
2)
During operation: Power tool cuts
out – allow battery to cool down; it
may be necessary to take the
battery out of the power tool for this
purpose.
3)
Battery is faulty and must be
replaced.
4)
STIHL recommends a STIHL
servicing dealer.
Light Emitting Diodes
(LED) on Charger
1
3901BA019 KN
To Next Page
Loading...
Need help?
General
