EasyManua.ls Logo

Stihl HSE 71 - User Manual

Stihl HSE 71
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
STIH)
STIHL HSE 61, 71, 81
2008-02

Table of Contents

Other manuals for Stihl HSE 71

Questions and Answers

  • R
    Richard BaxterAug 8, 2025
    Why Stihl HSE 71 motor does not run?
    • N
      nielsenwendyAug 9, 2025
      If the motor of your Stihl Trimmer doesn't run, it could be due to several reasons: * There's no power reaching the unit. * The connecting cord, plug, coupling, or switch is faulty. * The carbon brushes are worn. To address this, start by checking the fuse. Also have an electrician check and replace any faulty cords, plugs, or switches. If the carbon brushes are worn, replace them.
  • B
    bentonkarenAug 16, 2025
    What to do if Stihl Trimmer cutting performance unsatisfactory?
    • H
      Heather DavisAug 16, 2025
      If the cutting performance of your Stihl Trimmer is unsatisfactory, the most likely cause is dull cutting blades. Sharpening the blades should resolve this issue.
  • S
    Steven MoralesAug 23, 2025
    What to do if Stihl HSE 71 cutting blades do not move freely?
    • G
      glenmartinAug 23, 2025
      If the cutting blades of your Stihl Trimmer do not move freely, it's likely because the blades are dirty or loaded with resin. Cleaning the blades should solve this. If necessary, use a resin solvent.
  • J
    Jennifer HunterSep 1, 2025
    Why Stihl HSE 71 Trimmer blades continue to coast when switched off?
    • K
      katherine97Sep 1, 2025
      If the blades of your Stihl Trimmer continue to coast without being braked when the unit is switched off, it could be due to: * A missing or improperly installed switch pin. * An improperly assembled control unit. To fix this, ensure the switch pin is properly installed and that the control unit is correctly assembled.

Summary

2. Safety Precautions

3. Electrical System

3.1 Replacing the Carbon Brushes

Procedure for replacing the carbon brushes in the electric hedge trimmer.

3.2 Replacing the Connecting Cord

Steps to replace the connecting cord of the hedge trimmer.

3.3 Replacing the Motor

Instructions for removing and installing the motor.

3.4 Wiring - Switch - Capacitor

Procedures for wiring the switch and capacitor.

4. Cutting Attachment

4.1 Replacing the cutting attachment

Instructions for replacing the cutting attachment assembly.

5. Drive Gear

5.1 Servicing the drive gear

Procedures for servicing the main drive gear.

6. Housing and Handles

6.4 Servicing the rear handle

Procedures for servicing the rear handle assembly.

7. Switch Components

7.2 Servicing the control unit

Procedures for servicing the control unit.

8. General

8.1 Troubleshooting

Common problems, their causes, and remedies for the hedge trimmer.

Stihl HSE 71 Specifications

General IconGeneral
Blade size600 mm
Blade typeDouble blade
Product colorGrey, Orange, Black
Vibration emission3.8 m/s²
Engine power600 W
Power sourceBattery
AC input voltage230 - 240 V
Power cable length0.31 m
Weight and Dimensions IconWeight and Dimensions
Depth1230 mm
Weight- g

Related product manuals