Why Stihl HSE 61 Trimmer motor does not run?
If the motor of your Stihl Trimmer doesn't run, it could be due to several reasons: * There's no power reaching the unit. * The connecting cord, plug, coupling, or switch is faulty. * The carbon brushes are worn. To address this, start by checking the fuse. Also have an electrician check and replace any faulty cords, plugs, or switches. If the carbon brushes are worn, replace them.
What to do if Stihl Trimmer cutting performance unsatisfactory?
If the cutting performance of your Stihl Trimmer is unsatisfactory, the most likely cause is dull cutting blades. Sharpening the blades should resolve this issue.
What to do if Stihl HSE 61 Trimmer cutting blades do not move freely?
If the cutting blades of your Stihl Trimmer do not move freely, it's likely because the blades are dirty or loaded with resin. Cleaning the blades should solve this. If necessary, use a resin solvent.
Why Stihl Trimmer blades continue to coast when switched off?
If the blades of your Stihl Trimmer continue to coast without being braked when the unit is switched off, it could be due to: * A missing or improperly installed switch pin. * An improperly assembled control unit. To fix this, ensure the switch pin is properly installed and that the control unit is correctly assembled.
General| Blade size | 500 mm |
|---|---|
| Blade type | Double blade |
| Product color | Orange, Black, Grey |
| Vibration emission | 5.3 m/s² |
| Engine power | 500 W |
| Power source | AC |
| AC input voltage | 230 - 240 V |
| Power cable length | 0.31 m |
Weight and Dimensions| Depth | 1130 mm |
|---|---|
| Weight | 3900 g |
Adherence to local and country-specific safety rules during operation and repair.
Highlights electrical safety measures for repairs, requiring qualified electricians.
Step-by-step guide for removing and installing carbon brushes.
Identifies common problems, their causes, and remedies.
Provides recommended maintenance intervals for various components.
To Next Page
