HT 75
English
18
WARNING
Always shut off the engine and fit the
chain scabbard!
N Loosen the clamp nut half a turn
counterclockwise
N Adjust the shaft to the required
length
N Tighten the nut clockwise
The type and style of the harness
depend on the market.
Shoulder Strap
N Put on the shoulder strap (1).
N Adjust the length of the strap.
N With the power tool attached, the
carabiner (2) must be at about the
same height as your right hip.
Backpack carrying system
N Put the backpack carrying
system (1) on your back and adjust
it as described in the instruction
leaflet provided.
N Attach the carabiner (1) to the clip-
on carrying ring (2) on the shaft.
N Attach the pole saw to the carrying
strap when cutting.
Adjusting the Telescoping
Shaft
0000097196_001
Fitting the Harness
Backpack Carrying System
2
3
1
0000-GXX-1573-A1
To Next Page
Loading...
