► Use an extension cable with the same
specifications as the power supply's con‐
necting cable.
WARNING
■
An incorrect line voltage or mains frequency
can result in an overvoltage in the power sup‐
ply. The power supply may be damaged.
►
Make sure the line voltage and mains fre‐
quency match the data on the power sup‐
ply's rating label.
■
If the power supply is connected to a power
strip, electrical components may be overloa‐
ded during the charging process. The electri‐
cal components may overheat and cause a
fire. Persons may be seriously or fatally
injured, and property may be damaged.
►
Ensure that the technical specifications for
the power strip are not exceeded by the
information on the rating plate of the power
supply and of all electrical devices connec‐
ted to the power strip.
■
An improperly routed connecting cable, exten‐
sion cable or charging cable can be damaged
and cause people to trip over them. This may
result in serious injury to people and damage
to property.
►
Route the wires and charging cable so that
they are outside of the mowing area.
► Route and mark the wires and charging
cable so that they will not be damaged by
work with a gardening device or tool.
►
Route and mark the wires and charging
cable in such a way that people cannot trip
over them.
►
Route the wires and charging cable in such
a way that they are not under tension or
tangled.
►
Route the wires and charging cable in such
a way that they will not be damaged, bent,
crushed or will not chafe.
►
Protect the wires and charging cable from
heat, oil and chemicals.
► Route the wires and charging cable so that
they are not on a permanently wet surface.
■ If electrical wiring and conduits are routed in
the wall, they may be damaged if the power
supply is mounted on the wall. Contact with
wiring can result in electric shock. This may
result in serious injury to people and damage
to property.
►
Make sure there is no electrical wiring or
conduits in the wall at the proposed mount‐
ing site.
►
Mount the power supply on a wall as descri‐
bed in this User Manual.
■ If the power supply is connected to a genera‐
tor, the electricity supply cannot be perma‐
nently ensured and the robot mower may not
function properly. The power supply may be
damaged by fluctuations in the electricity sup‐
ply.
►
Only connect the power supply to a prop‐
erly installed socket.
4.10 Transporting
4.10.1 Robot mower
WARNING
■ The robot mower may tip over or move during
transport. This may result in injury to people
and damage to property.
► Stop the robot mower and activate
the device lock.
► Secure the robot mower with lashing straps,
belts or a net so that it cannot tip over or
move.
4.10.2 Battery
The battery has been installed in the robot
mower and must only be removed by a STIHL
authorized dealer.
WARNING
■
The battery is not protected against all envi‐
ronmental conditions. The battery may be
damaged if it is exposed to certain ambient
conditions, and damage to property may
occur.
►
Never transport a damaged battery.
■ The battery may turn over or shift during trans‐
port. Persons may be injured, or property may
be damaged.
►
Pack the battery in packaging in such a way
that it cannot move.
► Secure the packaging so that it cannot
move.
4.10.3 Docking station and power supply
WARNING
■
The docking station or power supply may tip
over or move during transport. This may result
in injury to people and damage to property.
►
Disconnect the mains plug from the wall
socket.
► Remove the robot mower from the docking
station.
4 Safety Precautions English
0458-012-0101-A 11
To Next Page
Loading...
Need help?
General
