Why Stihl Lawn Mower fails to start mowing process?
The Stihl Lawn Mower might fail to start due to a restart in progress, in which case you should wait for the restart to complete, as the mower will then automatically start. Alternatively, there may be a fault in the perimeter wire or guide wire. Ensure these wires are undamaged and correctly connected to both the docking station and the wire connector.
What to do if my Stihl Lawn Mower is not charging?
If your Stihl Lawn Mower isn't charging, first ensure that the charging contacts on both the docking station and the mower are clean. You can also follow the instructions in the MY iMOW® app for troubleshooting. If the problem continues, stop attempting to charge the mower, disconnect the power supply, and contact an authorized STIHL dealer.
Why does my Stihl Lawn Mower stop on the way back to the docking station?
Your Stihl Lawn Mower might be stopping on its way back to the docking station because the battery is discharged. To address this, ensure the perimeter wire doesn't exceed 850m. Also, optimize the guide wire's routing or install another guide wire within the mowing area. If possible, for sloped mowing areas, position the docking station in the lower area of the slope. You can also manually carry the mower to the docking station for charging.
Outlines the necessary qualifications and conditions for users of the robot mower.
Safety guidelines related to the robot mower and its operating environment.
Safety precautions and information regarding the robot mower's battery.
Safety warnings and precautions for the docking station and power supply.
Ensuring the robot mower itself is in a safe condition for operation.
Ensuring the mower blades are in a safe condition.
Ensuring the battery is in a safe condition.
Ensuring electrical components are in a safe condition.
Safety precautions during the mowing operation.
Safety guidelines for connecting the power supply.
Explains the core functional aspects and operation of the robot mower.
Guidance on planning and preparing the mowing area before commissioning.
Steps to prepare the robot mower for initial operation after unpacking.
Instructions for placing the docking station inside the mowing area.
Instructions for placing the docking station outside the mowing area.
Details on positioning the docking station within the mowing area.
Further instructions for positioning the docking station within the mowing area.
Steps for setting up the docking station outside the mowing area.
Instructions for setting up the docking station as an island in the mowing area.
Further instructions for setting up the docking station in the center of the mowing area.
Basic requirements and checks for installing the perimeter and guide wire.
Step-by-step guide for installing the perimeter wire.
Planning the guide wire and its connection point within the perimeter wire.
Final steps to complete the perimeter wire routing at the docking station.
More steps for completing perimeter wire routing.
Detailed instructions on how to install the guide wire.
Steps to electrically connect the perimeter and guide wires to the docking station.
Procedure for stopping the mower and activating its security lock.
Guides users through identifying and resolving common faults and issues.
General| Model | iMOW 7.0 EVO |
|---|---|
| Cutting Width | 28 cm |
| Battery Voltage | 18 V |
| Battery Capacity | 2.5 Ah |
| Cutting Height Adjustment | 20 - 60 mm |
| Battery Type | Lithium-Ion |
| Average Mowing Duration Per Battery Charge | 60 min |
| Charging Time | 60 min |
| Operating Time | 60 min |
To Next Page
