Why Stihl iMOW 6.0 fails to start mowing process?
The Stihl Lawn Mower might fail to start due to a restart in progress, in which case you should wait for the restart to complete, as the mower will then automatically start. Alternatively, there may be a fault in the perimeter wire or guide wire. Ensure these wires are undamaged and correctly connected to both the docking station and the wire connector.
What to do if my Stihl iMOW 6.0 Lawn Mower is not charging?
If your Stihl Lawn Mower isn't charging, first ensure that the charging contacts on both the docking station and the mower are clean. You can also follow the instructions in the MY iMOW® app for troubleshooting. If the problem continues, stop attempting to charge the mower, disconnect the power supply, and contact an authorized STIHL dealer.
Why does my Stihl iMOW 6.0 Lawn Mower stop on the way back to the docking station?
Your Stihl Lawn Mower might be stopping on its way back to the docking station because the battery is discharged. To address this, ensure the perimeter wire doesn't exceed 850m. Also, optimize the guide wire's routing or install another guide wire within the mowing area. If possible, for sloped mowing areas, position the docking station in the lower area of the slope. You can also manually carry the mower to the docking station for charging.
General| Brand | Stihl |
|---|---|
| Model | iMOW 6.0 |
| Category | Lawn Mower |
| Language | English |
Explains the meaning of DANGER and WARNING notices to highlight potential risks.
Explains the meaning of various warning symbols used throughout the manual for safety.
Outlines the necessary qualifications, training, and conditions for safe operation of the robot mower.
Covers safety precautions related to the robot mower's operation within the mowing area and surrounding environment.
Details safety precautions concerning the docking station and power supply, including environmental and operational risks.
Specifies the conditions under which components are considered safe to operate.
Describes the conditions for safe battery operation and potential hazards.
Highlights safety warnings related to the actual mowing operation of the robot mower.
Details safety precautions and warnings regarding the connection of the power supply.
Guides the user on planning and preparing the mowing area for optimal robot mower installation and operation.
Outlines the general requirements and checks for routing the perimeter wire and guide wire in the mowing area.
Details how to install the perimeter wire correctly.
Guides on planning the guide wire and determining the connection point within the perimeter wire.
Details the final steps for routing the perimeter wire, connecting it to the base plate.
Continues instructions on installing the guide wire, including routing on inclines and connecting.
Details the process of electrically connecting the perimeter and guide wires to the docking station.
Guides on routing the charging cable and connecting the power supply to the docking station.
Describes the procedure for pushing the robot mower into the docking station to begin charging.
Details the procedure to stop the robot mower and activate its device lock for safety.
Provides a step-by-step guide on how to replace the robot mower's blades safely.
Advises that users cannot repair components themselves and to contact a dealer.
Lists common faults and their remedies, referencing the MY iMOW® app and control panel.
To Next Page
