Why Stihl iMOW 5.0 EVO fails to start mowing process?
The Stihl Lawn Mower might fail to start due to a restart in progress, in which case you should wait for the restart to complete, as the mower will then automatically start. Alternatively, there may be a fault in the perimeter wire or guide wire. Ensure these wires are undamaged and correctly connected to both the docking station and the wire connector.
What to do if my Stihl iMOW 5.0 EVO Lawn Mower is not charging?
If your Stihl Lawn Mower isn't charging, first ensure that the charging contacts on both the docking station and the mower are clean. You can also follow the instructions in the MY iMOW® app for troubleshooting. If the problem continues, stop attempting to charge the mower, disconnect the power supply, and contact an authorized STIHL dealer.
Why does my Stihl Lawn Mower stop on the way back to the docking station?
Your Stihl Lawn Mower might be stopping on its way back to the docking station because the battery is discharged. To address this, ensure the perimeter wire doesn't exceed 850m. Also, optimize the guide wire's routing or install another guide wire within the mowing area. If possible, for sloped mowing areas, position the docking station in the lower area of the slope. You can also manually carry the mower to the docking station for charging.
General| Brand | Stihl |
|---|---|
| Model | iMOW 5.0 EVO |
| Category | Lawn Mower |
| Language | English |
Lists related documents and explains text symbols used in the manual.
Explains DANGER and WARNING notices for risk communication.
Details robot mower components and control panel functions.
Details the components of the robot mower's mowing unit.
Lists components of the docking station, power supply, and installation tools.
Explains warning symbols and text symbols used in the manual.
Defines the intended purpose and application of the robot mower.
Outlines the conditions and qualifications required for users.
Specifies recommended clothing and safety equipment for operation.
Details safety measures for the robot mower and its operating area.
Provides safety instructions for handling and using the battery.
Defines safe conditions for the robot mower and its blades.
Outlines safety for battery, docking station, and mowing operations.
Safety warnings for charging and connecting the power supply.
Safety guidelines for transporting the robot mower, battery, and docking station.
Safety instructions for storing the robot mower, battery, and docking station.
Explains the basic functionality and operation of the robot mower.
Guides on planning and preparing mowing areas and surfaces for installation.
Steps to prepare the robot mower and docking station for installation.
Options for placing the docking station within the mowing area.
Specific scenarios for setting up the docking station.
Steps for preparing the docking station for cable connection.
Instructions for securing the DS and feeding the perimeter wire.
Detailed setup options for the docking station outside and in the center.
Further details on setting up the docking station in the center of the mowing area.
General requirements and guidelines for installing the perimeter wire.
Explains wire reserves and provides examples for wire installation.
Details guide wire functions and planning for its routing.
Steps for connecting the guide wire to the perimeter wire.
Guides on routing perimeter wire around corners with different angles.
Defines requirements for areas adjacent to the mowing area.
Guidelines for routing perimeter wire near water areas and drop-off edges.
Defines requirements for blocking off restricted areas within the mowing area.
Guides for navigating and routing perimeter wire in confined sections.
Using a guide wire to navigate confined sections.
Instructions for using corridors to define mowing area passages.
General requirements for corridors, wire loops, and guide wire routing.
Steps for installing a corridor using perimeter wire.
Information on the robot mower's ability to navigate inclines and slopes.
Instructions for installing perimeter wire on inclines and for side areas.
Information on using the STIHL AKM 100 for small mowing areas.
Routing and securing perimeter wire at the docking station.
Routing perimeter wire for docking station placed outside the mowing area.
Routing and marking perimeter wire at the docking station.
Routing perimeter wire for docking station in center of mowing area.
Steps for installing and routing the guide wire.
Instructions for connecting perimeter and guide wires to the docking station.
Steps for routing the charging cable and connecting the power supply.
Instructions for mounting the power supply on a wall.
Steps for charging the robot mower and activating energy efficient charging mode.
Explains the status indicators for the robot mower and docking station LEDs.
How to start and stop the robot mower using the control panel.
How to stop, lock, and get status information from the robot mower.
Overview of functions and setup for the MY iMOW® mobile application.
Safety guidelines for transporting the battery.
Safety instructions for storing the robotic mower.
Steps for cleaning the robot mower, including blades and contacts.
Steps for cleaning the docking station, power supply, and associated cables.
Regular checks for robot mower condition, wheels, and blade disk.
Step-by-step guide for replacing the robot mower's blades.
Information on component repairs and contacting dealers.
How to extend or repair perimeter and guide wires using connectors.
Common faults, their causes, and remedies for the robot mower.
Technical specifications for the STIHL iMOW® robot mower.
Technical specs for mower, blades, battery, and Bluetooth/WLAN.
Technical specs for docking station, power supply, and extension cords.
Operating and storage temperature limits and recommended ranges.
Information on noise levels and proper disposal of the robot mower.
EU conformity declaration for the robot mower.
UK conformity declaration for the robot mower.
Information regarding open source software used in the product.
To Next Page
