What to do if Stihl RMI 632 P battery is discharged?
If your Stihl Lawn Mower displays a 'Battery discharged' message, it means the battery voltage is too low. To resolve this, place the robotic mower in the docking station to recharge the battery.
What to do if Stihl RMI 632 P Lawn Mower displays error 0187 – Temperature high?
If your Stihl Lawn Mower displays error '0187 – Temperature high', see message 0181: allow the robotic mower to cool down.
Stihl Lawn Mower error 0185 – Temperature high, what to do?
If your Stihl Lawn Mower displays error '0185 – Temperature high', see message 0181: allow the robotic mower to cool down.
How to fix Stihl RMI 632 P Lawn Mower data loss error?
If your Stihl Lawn Mower displays a 'Data loss' error, it could be due to a software update, voltage loss, or a software/hardware error. Press the OK button to release the mower, which will then operate with its default settings. Check and correct the date, time, and mowing plan if necessary.
What to do if Stihl Lawn Mower displays error 0186 – Temperature low?
If your Stihl Lawn Mower displays error '0186 – Temperature low', see message 0180: let the robotic mower warm up at ambient temperature.
General| Battery Voltage | 36 V |
|---|---|
| Battery Type | Lithium-ion |
| Engine Type | Electric |
| Cutting Height Range | 20 - 60 mm |
| Sound Power Level | 60 dB(A) |
| Cutting Height Adjustment | Central |
General information about the manual and STIHL's product development.
Explains differences in plugs and switches based on country.
Explains how to interpret symbols, text passages, and references within the manual.
Identifies and describes the main parts of the robotic mower.
Identifies and describes the components of the docking station.
Details the control pad, buttons, and graphical display of the mower's interface.
Explains the function and operation of the emergency STOP button.
Details how to activate and deactivate the disabling device for safety.
Details the impact sensor that stops the mower upon contact with obstacles.
Explains how lifting the mower immediately stops its operation.
Explains the PIN request feature for security and unauthorized operation prevention.
Details GPS protection for tracking and security, requiring a PIN code.
Overarching safety rules, reading instructions, and user responsibility.
Advises on appropriate clothing and safety gear for operating the machine.
Highlights risks associated with electricity and proper handling of power components.
Instructions for safe handling, storage, and use of the battery.
Guidelines for safely lifting, carrying, and securing the machine for transport.
Essential checks and preparations required before the first use of the machine.
Instructions for setting operating times and adapting the mowing plan.
Safety precautions and guidelines to follow while the machine is in operation.
Procedures for cleaning, maintenance, and repair of the machine.
Steps for preparing and storing the machine for extended periods.
Instructions for environmentally friendly disposal of waste products and the machine.
Refers to a separate quick guide for installation assistance, complementing the main manual.
How to navigate through the mower's menu system using the control pad.
Details the various pieces of information displayed in the status and information areas.
Describes the primary navigation menu and its options.
How to initiate mowing operations, either automatically or manually.
How to set and manage the mower's mowing schedule and active times.
Access to additional functions and settings not found in the main menu.
Configuration options for mower settings, including plan type, sensors, and display.
Specific settings for the mower's operation, like mow plan and rain sensor.
How to adjust the rain sensor sensitivity to manage mowing during wet conditions.
Instructions related to mower installation, specifically passages and starting points.
Detailed guide on defining and setting starting points for mowing operations.
Configuration of safety levels, PIN codes, and locks for mower security.
Information regarding service operations like blade replacement and wire break finding.
Strategizing the perimeter wire layout, including no-go areas and clearances.
Guidance on creating a map of the mowing area for wire installation planning.
Step-by-step instructions for laying out the perimeter wire.
How to connect the perimeter wire ends to the docking station.
Using the IMOW® Ruler to ensure correct wire clearances around obstacles and edges.
Specific instructions for routing wire around sharp corners.
Guidelines for installing wire in confined areas and managing narrow passages.
How to use linking sections for secondary areas or no-go zones.
Defining areas where the mower should not operate.
Setting up separate mowing areas that require manual transfer.
Installing corridors to link different mowing areas.
Installing guide loops for offset drive home functionality.
Techniques for achieving precise mowing along lawn edges.
Routing the perimeter wire on slopes and managing clearances.
Installing reserve wire for future adjustments.
Using wire connectors for extending or joining perimeter wire.
Explains the function of the LED indicator and the control button on the docking station.
General notes on the robotic mower's design and mowing performance.
Explanation of the mulching function and its benefits.
How active times affect mowing operations and safety considerations.
Setting and understanding the weekly mowing duration.
Defining and updating the mower's home area using GPS.
Steps and checks required before operating the machine.
How to detach and reattach the control panel for manual mowing or programming.
Adjusting mowing plans, active times, and mowing duration.
How to switch automatic mowing on/off and manage mowing operations.
Initiating mowing operations outside of scheduled active times.
Detailed steps for operating the mower manually.
Procedures for automatically or manually docking the mower.
Recommended intervals for performing maintenance tasks.
Procedures for cleaning the mower.
How to check the mowing blade for wear and determine replacement.
Step-by-step procedure for safely removing the battery.
Proper techniques for lifting and carrying the mower.
How to secure the mower during transport using fastening materials.
Form for confirming handover of the mower.
Form for confirming service operations performed.
To Next Page
