
Do you have a question about the Stihl RMI 522 C and is the answer not in the manual?
| Cutting Width | 20 in (51 cm) |
|---|---|
| Battery Type | Lithium-Ion |
| Cutting Height Adjustment | Central |
| Sound Power Level | 60 dB(A) |
| Warranty | 2 years |
| Maximum Lawn Area | 2100 m² |
| Slope Capability | 40% |
| Rated Output | 1000 W |
| Engine Type | DC electric motor |
| Power Output | 1000 W |
| Cutting Height Range | 0.8 - 2.4 inches |
| Vibration Level Left/Right | 2.5/2.5 m/s² |
Describes how the mower operates, uses the perimeter wire, and handles obstacles.
Explains the immediate stop function of the red STOP button.
Details how to activate and deactivate the disabling device for safety.
Emphasizes reading the manual, responsible use, and user responsibility.
Warns about electric shock risks from power cables and connections.
Provides safety instructions for battery handling, storage, and charging.
Lists checks and preparations required before the first use.
Outlines safety measures during mowing operations, including personnel and slopes.
Stresses safety during maintenance and the importance of specialist dealers.
Detailed instructions and considerations for laying the perimeter wire.
Procedure for establishing communication between mower and docking station.
Steps to verify the wire signal and installation correctness.
Guide to setting up mowing plans and active times.
Final steps for initial setup, including safety level adjustments.
Explains how to define starting points for mowing operations.
Details on creating internal maps and setting up direct drive home.
Covers disabling device, safety levels, GPS protection, and PIN codes.
Essential planning steps before routing the perimeter wire.
Instructions on how to route the perimeter wire around the area.
Steps for connecting the perimeter wire using cable guides and sockets.
Guidelines on wire clearances and using the iMOW® Ruler for measurements.
Checks and setup required before operating the machine.
How to adjust mowing plans, active times, and mowing duration.
Details on switching automatic mowing on/off and starting operations.
Procedures for automatic and manual docking.
Instructions for charging the battery automatically and manually.
Outlines maintenance intervals based on operating hours and recommendations.
Guidance on checking mowing blade wear limits and replacement.
Step-by-step instructions for blade removal and installation.
Steps to diagnose and locate breaks in the perimeter wire.