0478 131 8365 C - EN
38
9.13 Programming the robotic mower
Enter the size of the lawn and
confirm with OK.
A new mowing plan is being calculated.
The procedure can be cancelled using the
red STOP button on the top of the
machine.
Confirm the message "Confirm each
day individually or change active
time" by pressing the OK button.
The active times for Monday are
displayed and the menu item
Confirm active times is enabled.
All the active times are confirmed
with OK and the next day is
displayed.
The displayed active times can be
changed. For this purpose, select
the required time interval using the
control pad and open with OK. (Ö 14.3)
If additional active times are
required, select the menu item
New active time and open with OK.
Specify the start and end times of the new
active time in the selection window and
confirm with OK. Up to three active times
per day are possible.
If all the displayed active times are to
be deleted, select the menu item
Delete all active times and confirm
with OK.
The mowing plan is displayed after
the active times for Sunday have
been confirmed.
Installed no-go areas and
secondary areas must not be
included when calculating the size
of the mowing area.
In the case of small mowing areas,
not all the week days are used for
mowing. In this case, no active
times are displayed and the menu
item "Delete all active times" is
omitted. Days without active times
must also be confirmed with OK.
To Next Page
Loading...
Need help?
General
