Why Stihl iMOW 6.0 fails to start mowing process?
The Stihl Lawn Mower might fail to start due to a restart in progress, in which case you should wait for the restart to complete, as the mower will then automatically start. Alternatively, there may be a fault in the perimeter wire or guide wire. Ensure these wires are undamaged and correctly connected to both the docking station and the wire connector.
What to do if my Stihl iMOW 6.0 Lawn Mower is not charging?
If your Stihl Lawn Mower isn't charging, first ensure that the charging contacts on both the docking station and the mower are clean. You can also follow the instructions in the MY iMOW® app for troubleshooting. If the problem continues, stop attempting to charge the mower, disconnect the power supply, and contact an authorized STIHL dealer.
Why does my Stihl iMOW 6.0 Lawn Mower stop on the way back to the docking station?
Your Stihl Lawn Mower might be stopping on its way back to the docking station because the battery is discharged. To address this, ensure the perimeter wire doesn't exceed 850m. Also, optimize the guide wire's routing or install another guide wire within the mowing area. If possible, for sloped mowing areas, position the docking station in the lower area of the slope. You can also manually carry the mower to the docking station for charging.
General| Brand | Stihl |
|---|---|
| Model | iMOW 6.0 |
| Category | Lawn Mower |
| Language | English |
To Next Page
