Stihl iMOW 7.0 EVO - Maintenance and Repair; Visual Inspection; Replacing blades

20 Maintenance
20.1 Visual Inspection
► Regularly check the robot mower:
–
Cleanliness of the charging contacts
–
Check the hood and protective strip for
damage
–
Check that the wheels run smoothly
–
Check the blades for damage, wear, cracks
and smooth running
1
0000100420_001
–
Check the blade disk for damage and wear.
–
If the wear marks (1) are worn through,
creating a hole, replace the blade disk.
2
0000100056_001
–
Check the plug (2) of the diagnostic socket
for damage and tight fit.
20.2 Replacing blades
WARNING
■ The cutting edges of the blades are sharp.
There is a risk of cutting oneself.
► Wear work gloves made of robust material.
► Stop the robot mower and activate the device
lock.
2
1
0000100258_001
► Grab the robot mower at the front grip sur‐
face (1) and the rear grip surface (2).
► Turn the robot mower on its back.
3
3
4
0000100285_001
► Press and hold the lever (3).
► Rotate the nut (4) counterclockwise until it can
be removed.
4
5
0000100286_001
► Remove the nut (4).
► Remove the blade disk (5).
6
0000100287_001
► Push the blade carrier (6) in the direction indi‐
cated by the arrow .
The blade carrier (6) is unlocked.
► Remove the blade carrier (6).
7
7
7
0000100284_001
► Detach all old blades (7).
English 20 Maintenance
40 0458-012-0101-A