10
English / USA
KB, KW
MAINTENANCE, REPAIR AND
STORING
Maintenance, replacement, or repair
of the emission control devices and
systems may be performed by any
nonroad engine repair establishment
or individual. However, if you make a
warranty claim for a component
which has not been serviced or
maintained properly or if
nonapproved replacement parts were
used, STIHL may deny coverage.
!Warning!
Use only identical STIHL replacement
parts for maintenance and repair. Use of
non STIHL parts may cause serious or
fatal injury.
Strictly follow the maintenance and
repair instructions in the appropriate
section of your power tool and
attachment instruction manuals. Please
refer to the maintenance chart(s) and
maintenance notes in these manuals.
!Warning!
Always stop the engine and make sure
that the attachment is stopped before
doing any maintenance or repair work or
cleaning the power tool. Do not attempt
any maintenance or repair work not
described in your power tool and
attachment instruction manuals. Have
such work performed by your STIHL
servicing dealer only.
Wear gloves when handling or
performing maintenance on
attachments.
!Warning!
Never repair damaged attachments by
welding, straightening or modifying the
shape. This may cause parts of the
attachment to come off and result in
serious or fatal injuries.
Tighten all nuts, bolts and screws,
except the carburetor adjustment
screws, after each use.
Store the power tool in a dry and high or
locked location out of reach of children.
Sweeping Tools
There are two attachments designed for
sweeping and cleaning operations:
KB bristle brush
KW PowerSweep
Preparations
If the surface to be cleaned is dry, spray
it with water to reduce the amount of
dust created.
: To reduce the risk of accidents and
injury, remove all obstacles and
objects from the work area.
The sweeping tool is operated in the
forward direction only.
Using the Sweeping Tool
To Next Page
Need help?
General
