2 Series 4144 Powerhead
1. Introduction
This service manual contains 
detailed descriptions of all the repair 
and servicing procedures specific to 
this power tool.
You should make use of the 
illustrated parts lists while carrying 
out repair work. They show the 
installed positions of the individual 
components and assemblies.
Refer to the latest edition of the 
relevant parts list to check the part 
numbers of any replacement parts. 
A fault on the machine may have 
several causes. To help locate the 
fault, consult the troubleshooting 
charts for all assemblies and 
systems in this manual and the 
"STIHL Service Training System".
Refer to the “Technical Information” 
bulletins for engineering changes 
which have been introduced since 
publication of this service manual. 
Technical information bulletins also 
supplement the parts list until a 
revised edition is issued.
The special tools mentioned in the 
descriptions are listed in the chapter 
on "Special Servicing Tools" in this 
manual. Use the part numbers to 
identify the tools in the 
"STIHL Special Tools" manual. The 
manual lists all special servicing 
tools currently available from 
STIHL.
Symbols are included in the text and 
pictures for greater clarity. 
The meanings are as follows:
In the descriptions:
: = Action to be taken as 
shown in the illustration above   
the text
– = Action to be taken that is 
not shown in the illustration 
above 
the text
In the illustrations:
A Pointer
aDirection of movement
@ 4.2 = Reference to another
chapter, i.e. chapter 4.2 
in this example
Service manuals and all technical 
information bulletins are intended 
exclusively for the use of properly 
equipped repair shops. They must 
not be passed to third parties.
Always use original STIHL 
replacement parts.
They can be identified by the STIHL 
part number,
the {
logo and the
STIHL parts symbol K
This symbol may appear alone on 
small parts.
Storing and disposing of oils 
and fuels
Collect fuel or lubricating oil in a 
clean container and dispose of it 
properly in accordance with local 
environmental regulations.