28
English
MS 170, MS 180, MS 180 C
: Take out the screw (8).
: Position the tensioning gear (7)
against the guide bar (9).
: Fit and tighten down the screw (8).
Wear work gloves to protect your
hands from the sharp cutters!
: Fit the chain – start at the bar nose.
Pay attention to the position of the
tensioning gear and the cutting
edges.
: Turn the tensioning gear (7)
clockwise as far as stop.
8
140BA002 KN
7
9
140BA003 KN
8
135BA007 KN
7
To Next Page
Loading...
