Name: Stihl MS 181
Brand: Stihl
Rating: 5 (1 reviews)

To Next Page

To Previous Page

MS 171, MS 171 C, MS 181, MS 181 C, MS 211, MS 211 C

English

N Remove screw (2)

N Position tensioning gear (1) and

guide bar (3) relative to one another

N Insert and tighten screw (2)

Releasing the chain brake

N Pull hand guard towards the front

handle until it engages audibly –

chain brake is released

Fitting the saw chain

WARNING

Put on protective gloves – risk of injury

by the sharp cutters.

N Fit the saw chain – starting at the

nose of the guide bar – pay attention

to the position of the tensioning gear

and the cutting edges

N Turn tensioning gear (1) to the right

as far as possible

N Turn the guide bar so that the

tensioning gear faces the user

N Place the saw chain on the chain

sprocket (2)

N Slide the guide bar over the collar

screw (3); the head of the rear collar

screw must protrude into the oblong

hole

2310BA015 KN

2310BA016 KN

2310BA017 KN

001BA186 KN

181BA012 KN

181BA013 KN

Other manuals for Stihl MS 181

Questions and Answers:

Need help?

Do you have a question about the Stihl MS 181 and is the answer not in the manual?

General