Stihl MS 192 TC User Manual

MS 192 T, MS 192 TC
English
42
Maintenance and Care
The following maintenance intervals apply for normal operating conditions only. If your daily working
time is longer or operating conditions are difficult (very dusty work area, resin-rich wood, tropical
wood, etc.), shorten the specified intervals accordingly. If you only use the saw occasionally, extend
the intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged if required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Throttle trigger, throttle trigger lockout, choke
lever, stop switch, Master Control lever (depending
on version)
Check operation XX
Chain brake
Check operation XX
Have checked by dealer
1)
X
Pickup body/filter in fuel tank
Check X
Clean, replace filter element XX
Replace XXX
Fuel tank Clean X
Chain oil tank Clean X
Chain Lubrication Check X
Saw chain
Inspect, also check sharpness XX
Check chain tension XX
Sharpen X
Guide bar
Check (wear, damage) X
Clean and turn over X
Deburr X
Replace XX
Chain sprocket Check X
Air filter
Clean XX
Replace X
Anti-vibration elements
Check XX
Have replaced by dealer
1)
X

Stihl MS 192 TC Specifications

General

Engine Displacement	30.1 cm³
Fuel Capacity	0.27 L
Chain Oil Capacity	0.22 L
Chain pitch	3/8" P
Oilomatic saw chain type	Picco Micro Mini 3 (PMM3)
Power Output	1.3 kW
Guide Bar Length	30-35 cm
Guide bar lengths (recommended)	30-35 cm