Stihl MS 192 User Manual

MS 192 C
English
36
The air filter system can be adapted to
suit different operating conditions by
installing a choice of filters. Changing
the filter is quick and simple.
The saw comes standard with either a
fabric filter or a fleece filter.
Fabric filter
For normal operating conditions and
winter operation.
Fleece filter
For dry and very dusty work areas.
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
If there is a noticeable loss of engine
power
N Move the Master Control lever (1) to
F.
N Open the twist lock (2) in the
direction of the arrow.
N Remove the filter cover (3).
N Clean away loose dirt from around
the filter.
N Remove the filter.
N Knock the filter out on the palm of
your hand or blow it clear with
compressed air from the inside
outwards.
N Always replace damaged filters.
If filter is caked with dirt:
N Wash the sfilter with STIHL unversal
cleaner or in a clean, non-
flammable solution (e.g. warm
soapy water) and then dry.
N Place the filter (4) in position.
N Fit the filter cover.
Air Filter System Cleaning the Air Filter
151BA016 KN
2
3
1
Do not clean a fleece filter (option)
with a brush.
4
151BA017 KN

Stihl MS 192 Specifications

General

Engine Power	1.3 kW (1.8 hp)
Displacement	30.1 cm³
Sound Pressure Level	96 dB(A)
Sound Power Level	109 dB(A)
Weight	3.3 kg
Guide Bar Length	30-35 cm (12-14 inches)
Fuel Capacity	0.27 L
Chain Pitch	3/8"
Chain Oil Capacity	0.22 L