Stihl MS 200 T User Manual

25MS 200 T
English / USA
Opening the cap
: Raise the grip until it is upright
: Turn the cap counterclockwise
(approx. a quarter turn)
: Remove the filler cap
Closing the cap
: Fit the cap - grip upright -marks
must line up
: Turn the cap clockwise as far as
stop (approx. a quarter turn)
: Fold the grip flush with the top of the
cap.
If the grip does not lie completely flush
with the cap and the detent on the grip
does not engage the recess in the filler
neck, the cap is not properly seated and
tightened and you must repeat theabove
steps.
Change the fuel pickup body once
every year
: Drain the fuel tank.
: Use a hook to pull the fuel pickup
body out of the tank and take it off
the hose.
: Push the new pickup body into the
hose.
: Place the pickup body in the tank.
001BA160 KN
001BA161 KN
001BA162 KN001BA163 KN
MIX
142BA067 KN
1/1
1/2

Stihl MS 200 T Specifications

General

Brand	Stihl
Model	MS 200 T
Category	Chainsaw
Language	English