45MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
The air filter system can be adapted to
suit different operating conditions by
simply installing a choice of filters.
Fabric filter*
For normal operating conditions and
winter operation.
Fleece filter* (non-woven)
For dry and very dusty work areas.
* see "Guide to Using this Manual"
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
If there is a noticeable loss of
engine power
: Press down the throttle trigger
interlock and move the Master
Control lever to l (cold start).
: Turn the twist lock 90° to the left.
: Lift off off the carburetor box cover
vertically.
: Always replace damaged filter
elements.
: Clean away loose dirt from around
the filter.
: Place fingers behind the air filter (1),
press thumbs against the housing
and swing filter in direction of rear
handle.
To avoid damaging the air filter,
remove and install it without tools.
: Blow out the filter with compressed
air from the clean air side.
If the filter fabric is caked with dirt or no
compressed air is available:
: Wash the filter in a clean, non-
flammable solution (e.g. warm
soapy water) and then dry.
: Reinstall the filter.
Air Filter System
208BA001 KN
Cleaning the Air Filter
208BA005 KN
1
135BA035 KN
To Next Page
Loading...
