Stihl MS 211 C-BE User Manual

► Remove screw (2)
1
3
2310BA016 KN
► Position tensioning gear (1) and guide bar (3)
relative to one another
2
2310BA017 KN
► Insert and tighten screw (2)
7.3 Releasing the chain brake
001BA186 KN
► Pull hand guard towards the front handle until
it engages audibly – chain brake is released
7.4 Fitting the saw chain
1
181BA012 KN
WARNING
Put on protective gloves – risk of injury by the
sharp cutters.
► Fit the saw chain – starting at the nose of the
guide bar – pay attention to the position of the
tensioning gear and the cutting edges
► Turn tensioning gear (1) to the right as far as
possible
► Turn the guide bar so that the tensioning gear
faces the user
2
3
181BA013 KN
► Place the saw chain on the chain sprocket (2)
► Slide the guide bar over the collar screw (3);
the head of the rear collar screw must pro‐
trude into the oblong hole
7 Mounting the Bar and Chain (quick chain tensioner) English
0458-533-0121-E 17

Stihl MS 211 C-BE Specifications

General

Displacement	35.2 cm³
Power output	1.7 kW
Oilomatic chain type	Picco Micro 3 (PM3)
Guide Bar Length	35 cm
Chain pitch	3/8"