Stihl MS 250

52
English / USA
MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
Standard versions
Versions with Easy2Start
: Remove the spring clip (7).
: Carefully remove the rope rotor
with washer (8) and pawl (9).
The rewind spring may pop out and
uncoil – take care to avoid injury.
Replacing the Starter Rope
Versions with ElastoStart
1)
: Ease the cap (10) out of the starter
grip.
: Remove the remaining rope from
the rotor and grip.
: Thread the new rope through the
starter grip and tie a simple
overhand knot. Dimension "a"
should be 0.16“ to 0.27“
(4 mm to 7 mm).
: Pull the knot back into the grip.
: Refit the cap in the grip.
1)
Special version
: Thread the rope through the top of
the guide bush (11), pull it through
the rotor (12) and secure it with a
simple overhand knot.
: Go to "Installing the Rope Rotor".
7
8
9
208BA013 KN
7
8
9
208BA017 KN
9
10
208BA014 KN
a
135BA036 KN
1
2
11
108BA015 KN