16 MS 460, MS 460 C
If the clutch drum is still serviceable,
use No. 120 emery paper or emery
cloth (grain size approx. 120 µm) to
clean and roughen its friction
surface.
Install in the reverse sequence.
VA
176RA330
Clean stub of crankshaft. Wash
needle cage, examine it for damage
and replace if necessary. Lubricate
needle cage with STIHL multi-
purpose grease, b 16.
– Rotate clutch drum/chain
sprocket and apply slight
pressure at the same time until
the oil pump drive spring
engages the notch (see arrow).t
– Remove the chain sprocket cover
– b 5.1
: Remove screw (1) from chain
catcher (2) and lift away the chain
catcher.
Install in the reverse sequence.
VA
176RA000
2
1
Troubleshooting – b 4.1
– Remove the clutch drum or chain
sprocket, b 5.1
: Loosen the twist lock (1) and lift
off the carburetor box cover (2)
upwards.
VA
176RA002
1
2
: Remove the air baffle (1).
– Pull off the spark plug boot and
unscrew the spark plug.
VA
176RA250
1
5.2 Replacing the
Chain Catcher
5.3 Clutch
To Next Page
Loading...
