26
English / USA
MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C
Models with Quick Chain
Tensioner
: Disconnect plug from power supply.
: Swing up the hinged handle (1) so
that it snaps into position.
: Turn the wingnut (2) counter-
clockwise until it hangs loose in the
chain sprocket cover (3).
: Remove the sprocket cover.
: Remove the tensioning gear (4) and
turn it over.
: Take out the screw (5).
: Position the tensioning gear (6)
against the guide bar (7).
: Fit and tighten down the screw (8).
Fitting the Chain
: Wear work gloves to protect your
hands.
: Fit the chain, start at the bar nose,
pay attention to position of
tensioning gear and the cutting
edges.
: Turn tensioning gear (9) clockwise
as far as stop.
1
2
3
100BA028 KN
4
100BA007 KN
5
135BA005 KN
6
7
135BA006 KN
8
135BA007 KN
9
135BA008 KN
To Next Page
Loading...
