Stihl MSE 140

44
English / USA
MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C
MSE 140 C
MSE 180 C
Chain lubrication
Fully automatic speed-controlled oil
pump
Oil tank capacity
6.8 oz (0.20 L)
Weight
without bar and chain
Cutting Attachment
Recommended cutting attachments for
compliance with § 5.11 of ANSI standard
B 175.1-2000
(see page 13 of this manual):
Guide bar
STIHL reduced kickback bar
(with green label) for 3/8" P pitch:
- Picco Micro Mini, groove width
0.04 in (1.1 mm)
- Picco Micro, groove width
0.05 in (1.3 mm)
Rollomatic with sprocket nose
12, 14 or 16 in (30, 35 or 40 cm)
Oilomatic chain
STIHL low kickback chain
1)
(with green label)
for 3/8" P pitch:
3/8" (9.32 mm) Picco-Micro Mini
(61 PMN)
3/8" (9.32 mm) Picco-Micro
(63 PM1, 63 PMC3)
Spur sprocket:
7-tooth for 3/8" P pitch
Since new bar/chain combinations may
be developed after publication of this
manual, ask your STIHL dealer for the
latest recommendations.
1)
See definition of "low kickback
chain" on page 15 of this manual.
In order to comply with the kickback
performance requirements of § 5.11 of
ANSI standard B 175.1-2000, do not use
replacement saw chain unless it has
been designated as meeting the ANSI
§ 5.11 requirements on this specific
powerhead, or has been designated as
"low kickback" saw chain
1)
in
accordance with the ANSI B 175.1-2000
standard.
1)
See definition of "low kickback
chain" on page 15 of this manual.
Voltage 120 V
Frequency 60 Hz
Rating 1.4 kW
Enclosure IP 20
Insulation II
Amp rating 15 A
Voltage 120 V
Frequency 60 Hz
Rating 1.8 kW
Enclosure IP 20
Insulation II
Amp rating 15 A
MSE 140 C 7.3 lbs (3.3 kg)
MSE 180 C 7.7 lbs (3.5 kg)
Specifications