Stihl MSE 160 User Manual

Instruction Manual
Manual de instrucciones
Warning!
To reduce the risk of kickback injury use
STIHL reduced kickback bar and STIHL PMN
(3/8" Picco), PM1 (3/8" Picco) or PMC3
(3/8" Picco) chain depending on sprocket pitch
or other available low kickback components.
Advertencia!
Para reducir el riesgo de lesionarse como
resultado de un culatazo, utilice la barra de
contragolpe reducido y la cadena PMN (Picco
de 3/8 pulg), PM1 (Picco de 3/8 pulg) o PMC3
(Picco de 3/8 pulg) de STIHL, dependiendo de
la rueda dentada usada y de otros
componentes reductores de contragolpe.
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede causar
lesiones graves o mortales.
STIH)
STIHL MSE 140, 160, 180, 200
BA_U1_MSE_140_86_01.fm Seite 0 Mittwoch, 14. Juni 2006 2:13 14

Stihl MSE 160 Specifications

General

Brand	Stihl
Model	MSE 160
Category	Chainsaw
Language	English

Summary

Important Safety Precautions

Kickback Safety Measures

Details risks and preventative measures for chainsaw kickback.

General Safety Rules

Covers essential safety practices for operating the chainsaw.

Electric Safety Precautions

Electrical Hazards and Prevention

Details risks from power supply, wet conditions, and flammable materials.

Cable and Extension Cord Safety

Understanding Reactive Forces

Kickback, Pushback, and Pull-in Dynamics

Explains various reactive forces encountered during chainsaw use.

Kickback Standards and Reduction

ANSI Kickback Requirements

Avoiding Kickback Situations

Techniques to Prevent Kickback

Lists practical methods and precautions to prevent kickback.

Cutting Techniques: Felling

Felling a Tree Safely

Felling Techniques: Notches and Paths

Escape Paths and Felling Notches

Conventional Cut Method

Cutting Techniques: Advanced Methods

Open-Face and Sapwood Cuts

Felling Techniques for Tree Types

Hinge Control and Diameter Cuts

Specialized Cutting Techniques

Plunge Cutting and Limbing Procedures

Bucking Logs Safely

Safe Bucking Procedures

Maintenance, Repair, and Storing

Servicing and Genuine Parts Guidance

Mounting the Bar and Chain

Bar and Chain Installation Steps

Step-by-step guide for fitting the guide bar and saw chain.

Chain Tensioner Systems Explained

Tensioning and Checking the Saw Chain

Chain Tension Adjustment Methods

Explains how to properly tension the saw chain.

Verifying Proper Chain Tension

Describes how to verify proper chain tension.

Chain Lubrication System

Lubricant Type and Tank Filling

Chain Brake Functionality

Chain Brake Operation and Maintenance

Details activation, release, and maintenance of the chain brake.

Connecting to Power and Switching On

Power Connection and Start-up Procedure

Switching Off and Overload Protection

Switching Off and Overload Reset

General Operating Instructions

During and After Operation Guidance

Saw Chain Maintenance and Sharpening

Correct Chain Sharpening Angles

Covers correct sharpening angles and cutter shapes.

Depth Gauge Adjustment Procedures

Details how to set and adjust the depth gauges.