What to do if Stihl MSA 160 C Chainsaw battery jams when being inserted in power tool / charger?
If your Stihl Chainsaw battery jams when being inserted into the power tool or charger, the guides or contacts might be dirty. Carefully clean the guides and contacts to resolve this issue.
How to troubleshoot a Stihl MSA 160 C that does not start?
If your Stihl Chainsaw doesn't start when switched on, there might be several reasons. First, check if there's proper electrical contact between the machine and the battery. Remove the battery, inspect the contacts, and reinsert it. If the battery is discharged (1 LED flashes green), charge it. If the battery is too hot or cold (1 LED is red), allow it to cool or warm up to about 15-20°C. If 4 LEDs flash red, remove and reinsert the battery; if they continue to flash, the battery is faulty and needs replacement. If 3 LEDs on the battery are red, the machine is too hot and needs to cool off. If 3 LEDs flash red, remove and reinsert the battery; if they continue to flash, a servicing dealer should check the machine. Finally, check for moisture in the machine or battery and allow them to dry.
What to do if my Stihl Chainsaw switches off during operation?
If your Stihl Chainsaw switches off during operation, it could be due to the battery or machine electronics overheating. Remove the battery and allow both the battery and the machine to cool down. Another potential cause is an electrical or electromagnetic malfunction. Try removing the battery and then reinserting it to see if this resolves the issue.
Why is 1 LED red on my Stihl Cordless Saw?
If 1 LED on your Stihl Cordless Saw is emitting red light, the battery is either too warm or too cold. Engage the chain brake, remove the battery, and allow it to cool down or warm up to an acceptable temperature.
Why is my Stihl MSA 160 C battery not being charged even though LED on charger glows green?
If your Stihl Chainsaw battery is not charging even though the LED on the charger glows green, the battery might be too hot or too cold (1 LED on the battery glows red). Allow the battery to cool down, or if it's too cold, allow the battery to warm up slowly at temperatures of about 15°C - 20°C (59°F - 68°F). Also, ensure you operate the charger only in closed, dry rooms at ambient temperatures of 5°C - 40°C (40°F - 104°F).
How to fix no electrical contact between my Stihl MSA 160 C and battery?
To fix the issue of no electrical contact between your Stihl chainsaw and its battery, engage the chain brake and remove the battery. Clean the electrical contacts in the battery compartment, then reinsert the battery.
What to do if Stihl Chainsaw battery is faulty?
If the 4 LEDs on your Stihl Chainsaw battery flash red, the battery may be faulty. Remove the battery from the machine and reinsert it. Then, turn on the chainsaw. If the LEDs continue to flash, the battery is faulty and needs to be replaced.
What to do if Stihl MSA 160 C Chainsaw machine is too hot?
If the 3 LEDs on your Stihl Chainsaw battery are red, it indicates that the machine is too hot. Let the machine cool off before using it again.
How to fix a Stihl MSA 160 C Chainsaw that does not start?
If your Stihl Chainsaw does not start when switched on, there could be several reasons. First, check for electrical contact issues between the power tool and the battery. Remove the battery, visually inspect the contacts, and then reinsert the battery. If the battery has a low charge (1 LED flashes green), charge the battery. If the battery is too hot or too cold (1 LED glows red), allow it to cool down or warm up to about 15°C - 20°C (59°F - 68°F). If there is a malfunction in the battery (4 LEDs flash red), remove and refit the battery; if the LEDs continue to flash, replace the battery. If the power tool is too hot (3 LEDs glow red), let it cool down. For electromagnetic problems or faults (3 LEDs flash red), remove the battery, clean the contacts in the battery compartment, refit the b...
Why does my Stihl MSA 160 C run time get too short?
There are a couple of reasons why your Stihl Chainsaw's run time might be too short: * The battery may not be fully charged. To resolve this, fully recharge the battery, referring to the User Manual for the STIHL AL 101, 300, 500 chargers. * The battery's life may have been exceeded, meaning it's time to replace the battery.
General| Voltage | 36 V |
|---|---|
| Bar Length | 12 in |
| Chain Gauge | 0.043 in |
| Power Source | Battery |
| Bar Length (cm) | 30 cm |
| STIHL Oilomatic saw chain type | Picco Micro 3 (PM3) |
| Sound Power Level | 96 dB(A) |
| Chain Pitch | 0.25 in |
| Recommended Battery | AP 300 |
| Recommended Charger | AL 300 |
To Next Page
