Stihl Mse 210 c User Manual

MSE 170 C, MSE 190 C, MSE 210 C, MSE 230 C
English
16
N Plunge cut the guide bar into the
trunk until it exits on the other side
N Make the backcut (E) towards the
hinge (1)
– Exactly horizontal
– Do not cut into the hinge
N Make the backcut towards the
holding wood (2)
– Exactly horizontal
– Do not cut into the holding wood
Immediately before felling the tree, give
out a second warning cry of "timber!".
N Cut through the holding wood at an
angle from above with arms fully
extended
B) Thick trunks
Implement this backcut when the trunk
diameter is greater than the cutting
length of the machine.
N Engage the bumper spike behind
the holding wood and use this as the
rotation point – reposition the chain
saw as little as possible
N Tip of the guide bar must penetrate
the wood before the hinge (1) –
guide the chain saw absolutely
horizontally and swivel as widely as
possible
– Do not cut into the holding wood and
hinge
N Make the backcut up to the
hinge (2)
– Do not cut into the hinge
N Make the backcut up to the holding
wood (3)
– Do not cut into the holding wood
1.
2.
001BA265 KN
001BA266 KN
001BA267 KN
1.
2.
3.
4.
5.
6.

Stihl Mse 210 c Specifications

General

Brand	Stihl
Model	Mse 210 c
Category	Chainsaw
Language	English