Stihl OILOMATIC saw chain - Filing depth gauges

19
Filing Gauge
1 = 85° sighting edge for Micro™ cutter (RM, PM, PMN)
2 = 60° sighting edge for Super cutter (RS)
3 = 80° sighting edge for special ripping chain
4 = Sighting edge for 30° filing angle
5 = Sighting edge for 35° filing angle
6 = Sighting edge for 10° filing angle
7 = Cut-out for depth gauge setting
8 = Bar groove cleaner and scale for groove depth (mm)
18
File Recommendations
Chain Type File File Profile
1/4” STIHL Rapid™ Micro™ 5/32” Round
(4.0 mm)
3/8” STIHL Picco™ Micro™ 5/32” Round
Narrow (4.0 mm)
3/8” STIHL Picco™ Micro™ 5/32” Round
(4.0 mm)
.325” STIHL Rapid™ Micro™ or 3/16” Round
STIHL Rapid™ Super (4.8 mm)
3/8” STIHL Rapid™ Micro™ or 13/64” Round
STIHL Rapid™ Super (5.2 mm)
.404” STIHL Rapid™ Micro™ or 7/32” Round
STIHL Rapid™ Super (5.5 mm)
3/8” STIHL Rapid™ Super Tapered or
Square Ground Triangular
.404” STIHL Rapid™ Super Tapered or
Square Ground Triangular
Depth Gauge File Flat
STIHL Sharp Advice rdsp 110606 11/6/06 4:16 PM Page 21