7Cleaning Systems Safety Manual
English
During work
Never spray electrical 
appliances with water – 
risk of short-circuiting!
Never direct the 
high-pressure jet or water 
hose onto the machine 
itself or onto other 
electrical appliances or 
machines – risk of 
short-circuiting!
Never direct the jet of 
liquid towards yourself 
or other people, not 
even in order to clean 
clothing or shoes – 
risk of injury!
Never use the machine when there are 
people without protective clothing in the 
working area.
Do not direct the high-pressure jet 
against animals.
Keep children, animals and bystanders 
at a safe distance.
For reasons of hygiene, the machine 
cannot be used to clean surfaces which 
come into contact with foods. 
Hazardous substances (such as 
asbestos or oil) must not be allowed to 
escape into the environment unchecked 
when working with the machine. 
The relevant environment regulations 
must be observed without fail!
Do not use the high-pressure jet or 
steam jet to clean any surfaces 
containing asbestos cement, as 
dangerous breathable asbestos fibres 
may be released in addition to the dirt. 
The danger is greatest when the 
correspondingly cleaned surface has 
dried.
Do not smoke near the machine and 
when working with it – risk of fire! 
The fuel tank may give off inflammable 
vapours. 
Pull the plug immediately 
if the power cable is 
damaged – danger due 
to electric shocks!
Delicate parts made of rubber, fabric or 
similar materials must not be cleaned 
with a pencil jet, e.g. from the rotary 
nozzle. Maintain a sufficient distance 
between the high-pressure nozzle and 
the surface in order to avoid damaging 
the surface to be cleaned.
Toxic gases are produced 
in hot-water operation; 
these gases may be 
odourless and invisible. 
Never operate the 
machine in enclosed or 
poorly ventilated rooms. 
Risk of poisoning!
The trigger on the spray gun must move 
easily and automatically return to its 
starting position when released.
Always check that the machine is in 
good working order before starting work. 
Particular attention must be devoted 
to the power cable and mains plug, 
the high-pressure hose with spray 
attachment and to the safety parts. 
Check the oil level.