EN
13
0478 131 8327 B - EN
or auxiliary equipment, please always
contact a specialist dealer.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
Only use tools, accessories or
attachments approved for this machine by
STIHL or technically identical parts.
Otherwise, there may be a risk of
accidents resulting in personal injury or
damage to the machine. If you have any
questions, please consult a specialist
dealer.
The characteristics of original STIHL tools,
accessories and spare parts are optimally
adapted to the machine and the user's
requirements. Genuine STIHL spare parts
can be recognised by the STIHL spare
parts number, by the STIHL lettering and,
if present, by the STIHL spare parts
symbol. On smaller parts, only the symbol
may be present.
Always keep warning and information
stickers clean and readable. Damaged or
missing stickers must be replaced by new,
original plates from your STIHL specialist
dealer. If a component is replaced with a
new component, ensure that the new
component is provided with the same
stickers.
Regularly check that the mowing blade is
securely fastened and is not damaged or
worn.
Only perform work on the cutting unit when
wearing thick work gloves and exercising
extreme care.
Ensure that all nuts, pins and screws (in
particular the blade fastening screw) are
securely tightened so that the machine is
in a safe operating condition.
Check the complete machine and the
grass catcher box for wear or damage on
a regular basis, particularly before
extended periods when the machine is not
in use (e.g. over winter). For safety
reasons, worn or damaged parts must be
replaced immediately to ensure that the
machine is always in a safe operating
condition.
Components or guards that are removed
for maintenance operations must be
properly reinstalled immediately.
4.11 Storage for prolonged periods
without operation
Store the cooled machine, the battery and
the safety plug separately from each other
in a dry and locked room that is
inaccessible to children.
Ensure that the machine is protected from
unauthorised use (e.g. by children).
Thoroughly clean the machine before
storage (e.g. winter break).
Store the machine in good operational
condition.
4.12 Disposal
Ensure that old machines (lawn mower,
battery, charger, accessories) are properly
disposed of. Render the lawn mower
unusable prior to disposal. In order to
prevent accidents, ensure that you remove
the safety plug and the electric cable from
the switch to the motor.
Risk of injury due to the cutting tool!
Always store an old machine in a safe
place prior to scrapping. Ensure that the
machine and the cutting tool are kept out
of the reach of children.
Batteries must be disposed of separately
from the machine. Ensure that batteries
are discharged prior to disposal (e.g. by
running the motor) and that they are
disposed of safely and in an
environmentally friendly manner.
5. Description of symbols
Caution!
Read the instruction man-
ual before initial use.
Risk of injury!
Keep other persons out of
the danger area.
Caution –
sharp cutting blades!
The cutting blades run on
after the motor has been
switched off. Remove the
locking device (safety plug)
before performing mainte-
nance work.
RMA 339:
Start the motor.
To Next Page
Loading...
