Stihl RMA 339 - Installing the Dual Handlebar (RMA 339); Assembling the Grass Catcher Box

EN
17
0478 131 8327 B - EN
7.3 Installing the dual handlebar
(RMA 339)
Installing the upper handlebar:
● 1 Insert flat head bolt (I) through cable
guide (J) and attach electric cable (1).
● 2 Fit dual handlebar (2) onto both
lower handlebar sections (3).
● 3 Insert flat head bolts (I) – on right
with cable guide (J), on left without –
through the bores from the inside
outwards.
● 4 Tighten with rotary handles (K).
Installing cable clip:
● Install cable clip (4) on the upper
handlebar. Insert electric cable (1) as
shown.
● Close tab (5) and allow it to engage.
Distance between the cable clip and
switch:
25 - 27 cm
7.4 Assembling the grass catcher box
● Fit upper part of grass catcher box (B)
onto lower part of grass catcher
box (C). Ensure correct location in the
guides.
● Push stud (D) through the bores
provided from the inside.
● Allow upper part of grass catcher
box (B) to engage in the lower part of
the grass catcher box using slight
pressure.
● Attach the grass catcher box (Ö 9.7).