SG 20
English
8
N Mount the hand lever (4) with the
screws (5).
After completing assembly, do a test run
with clean water to check the sprayer for
leaks – do not use the sprayer if it is
leaking.
N Adjust the harness straps so that
the backplate fits snugly and
securely against your back.
Threading the harness straps
Tightening the harness straps
N Pull the ends of the straps
downward.
Loosening the harness straps
N Lift the tabs of the sliding adjusters.
Harness
373BA003 KN
373BA004 KN
To Next Page
Loading...
Need help?
General
